Due to the size of this machine, this took quite some time including the in ground brake dust deposits caught in the alloy wheels.
Once clayed and the vehicle was then cleaned again and dried in the usual manner of drying towels. Next stage was to remove the bird mark etching from the panels, so out came the machine polisher. As the etching was fairly minimal, these marks came off with 3M Fast Cut Plus after a couple of passes.
Next stage of the process was to prep the panels for the waxing, so first up was to use AG HD Cleanse. This was the first time I had used this product as the vehicles bodywork was very tidy. The HD Cleanse prepares the surfaces ready for waxing and removes any unwanted oils or surface residues from the bodywork. This product was applied on a panel at a time and then buffed off, leaving the panels super smooth.
Once whole vehicle has been HD Cleansed, the next stage was to wax the car, and the chosen choice of wax was Dodo Juice Supernatural. The first coat was applied and left to cure for approx 20 minutes before being buffed off. Before applying the second layer of Supernatural wax, the tyres were dressed and the alloys were sealed with Swissvax Autobahn wheel wax.
The car was then moved outside for a few shots and a quick wipe over with Zaino Z8 final spray.
